Just set mine up in 10.6.8. The steps were just a hair different:

1) Go to > System Preferences > Sharing
2) check the box next to “File Sharing”
3) specify the folder/s you want to share to the Wii in the window in the middle named “Shared Folders”
4) set User preferences in the “Users” list in the window on the right
5) click the gray “Options” button on the right above “Users”
6) check “Share files and folders using SMB (Windows)”
7) make sure you check which Accounts you are sharing in the window below
8) click the “Done” button
9) Quit System Preferences

and you’re all done. My AVIs stream wonderfully.

I tried to setup as from this guide but nothing, it just won’t connect.

I didn’t try the previous post by installing samba3 from terminal and won’t.

You can test this solution, if you like:

Re-installing SMB on Mac OS X Lion 10.7.x

Just a thought,but if you are unable to share to the whole drive couldn’t you just create a root folder and name it something like media_root and share it instead.Then just put all of your media inside it.You could try a couple files first,before you move your entire library.

HOWTO: WIIMC Connection with MacOS X (Lion, M. Lion, Mavericks 10.7-10.9) SMB-Network Share.

[WiiMC v1.3.3] – – –
The MacOS SMB-Network Share worked fine up to OSX Snow Leopard 10.6, but Apple decided to change the SMB-System from SMB 1 to SMB 2 in OSX Lion 10.7 . But the SMB 2 implementation was not 100% compabtible. And it did not got fixed in Mountain Lion 10.8 and the worst – it is still not fixed in OSX Maverick 10.9. ( Why? – You can read at the end of this post. )

Update-Info:

• In OSX Yosemity 10.10 SMB changed now from SMB 2 to SMB 3.
  With > SMBconf you can switch back to SMB 1, if needed.

So, the only option is, to replace the Apple SMB with a OpenSource SMB3 implementation.

For this – just download SMBUp.

Download – SMBUp: http://eduo.info/apps/smbup

SMBUp (v1.4.1+):

Did you lose your shared folders with the update of Mac OS X from Snow Leopard to Maverick? You can’t see your shared folders from your DVR or Mediacenter box hooked in your TV? The internet tells you to install gigabytes of developer tools and use tons of command-line instructions to regain the ability to see your mac from your other devices in the house after moving to Lion or Mountain Lion? We might be able to help.

1.After download unzip it to your application folder so that you have there the SMBUp.app.

2.Start SMBUp.app and close it. (This will write the configuration files if they are not existing.)

3.Go to /opt/local/etc/samba3/ and copy smb.conf.sample to smb.conf.

4.Open /opt/local/etc/samba3/smb.conf and edit it to the following but replace the following three settings:

*1* netbios name = add here your netbios name. You find it in SystemSettings > Sharing > Name of the system.
(Example: My Mac Book Pro >> netbios name = My-Mac-Book-Pro)

*2* [SERIEN_A-E] << The Name of the Folder you want to share

*3* path = The path on your mac to the folder

[global]

unix charset = UTF8

netbios name = *1*

server string = Samba %v on %L

map to guest = Bad User

log file = /usr/local/samba/var/log.%m

max log size = 50

debug timestamp = No

smb ports = 445

dns proxy = No

veto files = /Thumbs.db/.DS_Store/.TemporaryItems/TheVolumeSettingsFolder/TheFindByContentFolder/Temporary Items/Network Trash Foder/.AppleDouble/.bin/.AppleDesktop/._*/

workgroup = WORKGROUP

os level = 20

syslog = 0

security = user

guest account = nobody

unix extensions = no

announce version = 5.0

socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=8192 SO_SNDBUF=8192



[SERIEN_A-E]*2*

comment = Serien_A-E

path = *3*/Users/simon/Movies/Serien_A-E

available = Yes

browse able = Yes

guest ok = Yes

5.Save the smb.conf file.

6.Start SMBUp.app and [ Start ] the Sama Server.

7.Add the SMB-Share to your WiiMC Network Settings.

Enjoy the videos on your Wii-MC.

For more inforamtion have a look here: http://eduo.info/2013/07/13/smbup-faq

Why it is like it is:

Hello, everyone.
I am the developer for SMBUp. I see some comments that it doesn’t work in this specific scenario and want to help make it at least able to mimic the current set-up.

Some background:

SMBUp exists because a lot of my friends were affected Lion retiring Samba for their own solution. The reasons behind this change are varied and justifiable on Apple’s part, but the effect on users are undeniable. Old devices are incapable to connect to SMB shared from Lion. These old devices use an obsolete and old version of Samba (since it’s the only free and available implementation, just as Apple did in OS X until 10.7) and the client in this version is incapable of connecting to SMB folder shared in modern versions of the protocol (Lion supports SMB2, non GNU/GPL V3 Samba versions only support the old, 1997, slow and obsolete version of SMB implemented in Windows 3.1 for Workgroups).

For these devices there’s usually no way to use different versions of the SMB protocol, so even though Apple’s actions may be justified the problem exists and needs fixing.

Enter Samba through MacPorts. From the very first day Lion was launched tutorials were made to install Samba through MacPorts. These meant a lot of steps and a certain degree of expertise and time, as Xcode had to be downloaded and packages installed (several hours in total).

I created SMBUp because I’d been arguing someone would come up with a front-end for Samba from the day Lion was released and after almost a full year couldn’t believe nothing had come up. This also meant creating a Samba installer to free users of the need to do Xcode and Macports if all they wanted was samba.

So, to be clear: SMBUp is a front-end for Samba 3.2.15 and is fully compatible with MacPorts’ installation (if you allow SMBUp to install itself you’ll end up with the exact same set-up ad MacPorts).

This means there’s no difference in running Samba from a macports installation and using SMBup for it. There might be differences in the configuration of Samba itself, though.

SMBUp provides a front-end for most functionality in SMB.CONF but doesn’t preclude knowing about it for more advanced uses. It doesn’t include either HOMES or PRINTERS shares yet, so these are ignored.

When loading shares in SMBUp is uses default values for them (namely: guest access enabled, read-only shared folders). These can be overriden and advances settings accessed. For example, if your shared folder requires “create mask” to be “0765” and “printable” to be set to “no” this can be done through the advanced settings.

Currently SMBUp doesn’t store paths with spaces enclosed in double quotes. This shouldn’t be a problem since Samba doesn’t require it. You may see this difference if you compare both.

Also, if you install SMBUp and had Macports installed before, you can allow the program to read your existing config file or to create one from scratch. In either case we recommend keeping a copy of the one you know already works (normal location for smb.conf is “/opt/local/etc/samba/smb.conf”. If you close SMBUp once installed and copy the old file in the new location, upon start SMBUp should parse it properly.