USB Problems? Read This!

[checkme2807]

I’ve run the test for my external Samsung DVDR USB Drive with no luck.
Here’s the log
Cheers

[samuelfy]

Hi,
Here are the tests I ran.

Tried this on all my USB devices, none of them work at the moment, yet they all used to in the past. Especially the pen drive is giving me a headache as it seems to work whenever it pleases. Right now it doesn’t, but just a couple of days ago, with no changes to the filesystem or WiiMC, it did. The wakeup test failed on the DataStation, but I guess that’s because it just didn’t spin back up fast enough, as I could hear the device audibly getting ready only after the results had displayed onscreen.

Device:                    Filesystem: Test 1.12:  WiiMC 1.12:

16GB SanDisk Cruzer        FAT32       Compatible  no recognition, works sporadically

1TB WD Elements            NTFS        Compatible  recognized, DSI exception on access

400GB TrekStor DS maxi m.u NTFS        Compatible  recognized, DSI exception on access

[ulypow]

Hi my Hard drive is a 1 TB seagate free agent goflex external, the specs are here [http://www.seagate.com/www/en-us/products/external/external-hard-drive/desktop-hard-drive/#tTabContentSpecifications]

i attached the log of the usb test

when ever i try to access the hard drive on wiimc it crashes and goes back to the wii home menu, if you can fix this problem it would greatly be appreciated

[DreD]

Hi, here your USB Test (version 1.12) crashes seconds after starting the test.

It’s with a 2 GB usb stick from kingston:
Bus 001 Device 005: ID 13fe:3100 Kingston Technology Company Inc. 2 GB USB stick

[Dazzer]

From the latest versions (1.1.1 I think) I can’t see anymore the list of movies from my USB drive (IOMEGA) where I have 2 patitions (FAT32 and NTFS). Some months ago, it worked correctly but now I just see ‘USB FAT 32″. Thus it seems that it does access to the drive but it doesn’t do much more. I have the HBC 1.0.8 and IOS 58, today I even installed the custom IOS rev 21 and ping my wii to be sure to have latest cios, but it doesn’t change anything.
I run the test on wiimc and here are the results. I hope that you can help me. Thanks beforehand for your support
USB2 device test version: 1.12
=============================
USB2 device test method: 0

---

__usbstorage_IsInserted
USB_GetDeviceList. device_count: 1
USBStorage_Open id: -417398751
USB_OpenDevice, ret: 0
USB_GetDescriptors OK, configurations: 1
Configuration: 0
Interface: 0 InterfaceClass: 0x8 numendpoints: 2
USB_ENDPOINT_BULK found: 0x81 MaxPacketSize: 512
USB_ENDPOINT_BULK found: 0x2 MaxPacketSize: 512
Found device, InterfaceSubClass: 6
USB_SetConfiguration ok
USB_SetAlternativeInterface ok, alt: 0 int: 0
__usbstorage_reset, ret: 8
USBStorage_Open, USBStorage_Reset: 8
USBSTORAGE_GET_MAX_LUN, ret: 9 max_lun: 1
GetMaxLUN: 1
__usbstorage_clearerrors Ok
USBStorage_Inquiry: 0
USBStorage_ReadCapacity: 0 sector size: 512
USBStorage_MountLUN(0) Ok
USBStorage_Read sector: 0 num: 1
usbtimeout = 10
USB_ResumeDevice ret: -4
__usbstorage_clearerrors ret: 0
USBStorage_StartStop ret: 0
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
Read sector 0 ok
USB Device Compatible!!!
USB2 device test method: 1

---

__usbstorage_IsInserted
USB_GetDeviceList. device_count: 1
USBStorage_Open id: -434175965
USB_OpenDevice, ret: 0
USB_GetDescriptors OK, configurations: 1
Configuration: 0
Interface: 0 InterfaceClass: 0x8 numendpoints: 2
USB_ENDPOINT_BULK found: 0x81 MaxPacketSize: 512
USB_ENDPOINT_BULK found: 0x2 MaxPacketSize: 512
Found device, InterfaceSubClass: 6
USB_SetConfiguration ok
USB_SetAlternativeInterface ok, alt: 0 int: 0
USBSTORAGE_GET_MAX_LUN, ret: 9 max_lun: 1
GetMaxLUN: 1
__usbstorage_clearerrors Ok
USBStorage_Inquiry: 0
USBStorage_ReadCapacity: 0 sector size: 512
USBStorage_MountLUN(0) Ok
USBStorage_Read sector: 0 num: 1
usbtimeout = 10
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
Read sector 0 ok
USB Device Compatible!!!
USB2 device test method: 2

---

__usbstorage_IsInserted
USB_GetDeviceList. device_count: 1
USBStorage_Open id: -434175963
USB_OpenDevice, ret: 0
USB_GetDescriptors OK, configurations: 1
Configuration: 0
Interface: 0 InterfaceClass: 0x8 numendpoints: 2
USB_ENDPOINT_BULK found: 0x81 MaxPacketSize: 512
USB_ENDPOINT_BULK found: 0x2 MaxPacketSize: 512
Found device, InterfaceSubClass: 6
USB_SetConfiguration ok
USB_SetAlternativeInterface ok, alt: 0 int: 0
__usbstorage_reset, ret: 8
USBStorage_Open, USBStorage_Reset: 8
USBSTORAGE_GET_MAX_LUN, ret: 9 max_lun: 1
GetMaxLUN: 1
__usbstorage_clearerrors Ok
USBStorage_Inquiry: 0
USBStorage_ReadCapacity: 0 sector size: 512
USBStorage_MountLUN(0) Ok
USBStorage_Read sector: 0 num: 1
usbtimeout = 10
__usbstorage_clearerrors ret: 0
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
Read sector 0 ok
USB Device Compatible!!!
USB2 device test method: 3

---

__usbstorage_IsInserted
USB_GetDeviceList. device_count: 1
USBStorage_Open id: -434175961
USB_OpenDevice, ret: 0
USB_GetDescriptors OK, configurations: 1
Configuration: 0
Interface: 0 InterfaceClass: 0x8 numendpoints: 2
USB_ENDPOINT_BULK found: 0x81 MaxPacketSize: 512
USB_ENDPOINT_BULK found: 0x2 MaxPacketSize: 512
Found device, InterfaceSubClass: 6
USB_SetConfiguration ok
USB_SetAlternativeInterface ok, alt: 0 int: 0
__usbstorage_reset, ret: 8
USBStorage_Open, USBStorage_Reset: 8
USBSTORAGE_GET_MAX_LUN, ret: 9 max_lun: 1
GetMaxLUN: 1
__usbstorage_clearerrors Ok
USBStorage_Inquiry: 0
USBStorage_ReadCapacity: 0 sector size: 512
USBStorage_MountLUN(0) Ok
USBStorage_Read sector: 0 num: 1
usbtimeout = 10
__usbstorage_clearerrors ret: 0
USBStorage_StartStop ret: 0
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
Read sector 0 ok
USB Device Compatible!!!
USB2 device test method: 4

---

__usbstorage_IsInserted
USB_GetDeviceList. device_count: 1
USBStorage_Open id: -434175959
USB_OpenDevice, ret: 0
USB_GetDescriptors OK, configurations: 1
Configuration: 0
Interface: 0 InterfaceClass: 0x8 numendpoints: 2
USB_ENDPOINT_BULK found: 0x81 MaxPacketSize: 512
USB_ENDPOINT_BULK found: 0x2 MaxPacketSize: 512
Found device, InterfaceSubClass: 6
USB_SetConfiguration ok
USB_SetAlternativeInterface ok, alt: 0 int: 0
__usbstorage_reset, ret: 8
USBStorage_Open, USBStorage_Reset: 8
USBSTORAGE_GET_MAX_LUN, ret: 9 max_lun: 1
GetMaxLUN: 1
__usbstorage_clearerrors Ok
USBStorage_Inquiry: 0
USBStorage_ReadCapacity: 0 sector size: 512
USBStorage_MountLUN(0) Ok
USBStorage_Read sector: 0 num: 1
usbtimeout = 10
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
Read sector 0 ok
USB Device Compatible!!!
USB2 device test method: 5

---

__usbstorage_IsInserted
USB_GetDeviceList. device_count: 1
USBStorage_Open id: -434175957
USB_OpenDevice, ret: 0
USB_GetDescriptors OK, configurations: 1
Configuration: 0
Interface: 0 InterfaceClass: 0x8 numendpoints: 2
USB_ENDPOINT_BULK found: 0x81 MaxPacketSize: 512
USB_ENDPOINT_BULK found: 0x2 MaxPacketSize: 512
Found device, InterfaceSubClass: 6
USB_SetConfiguration ok
USB_SetAlternativeInterface ok, alt: 0 int: 0
USBSTORAGE_GET_MAX_LUN, ret: 9 max_lun: 1
GetMaxLUN: 1
__usbstorage_clearerrors Ok
USBStorage_Inquiry: 0
USBStorage_ReadCapacity: 0 sector size: 512
USBStorage_MountLUN(0) Ok
USBStorage_Read sector: 0 num: 1
usbtimeout = 10
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
Read sector 0 ok
USB Device Compatible!!!
Doing IOSReload.
USB2 device test method: 6

---

__usbstorage_IsInserted
USB_GetDeviceList. device_count: 1
USBStorage_Open id: -417398751
USB_OpenDevice, ret: 0
USB_GetDescriptors OK, configurations: 1
Configuration: 0
Interface: 0 InterfaceClass: 0x8 numendpoints: 2
USB_ENDPOINT_BULK found: 0x81 MaxPacketSize: 512
USB_ENDPOINT_BULK found: 0x2 MaxPacketSize: 512
Found device, InterfaceSubClass: 6
USB_SetConfiguration ok
USB_SetAlternativeInterface ok, alt: 0 int: 0
No get max lun call, max_lun: 2
GetMaxLUN: 2
__usbstorage_clearerrors Ok
USBStorage_Inquiry: 0
USBStorage_ReadCapacity: 0 sector size: 512
USBStorage_MountLUN(0) Ok
USBStorage_Read sector: 0 num: 1
usbtimeout = 10
USB_ResumeDevice ret: -4
__usbstorage_clearerrors ret: 0
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
Read sector 0 ok
USB Device Compatible!!!
USBStorage_Read sector: 512 num: 1
usbtimeout = 10
USB_ResumeDevice ret: -4
__usbstorage_clearerrors ret: 0
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
OK reading sector. Device wake up OK!!

[Dazzer]

I forgot to mention in my previous post that the I have the USB loader tool that works perfectly with my USB device. Thus my problem is more linked to wiimc installation.
Cheers

[Acatoxamabomybes]

@mugre1975 wrote:

I’ve run the test for my external Samsung DVDR USB Drive with no luck.
Here’s the log
Cheers

I’ve run the test for my external Samsung DVDR USB Drive with no luck too.
Here’s the log
Cheers

ezi

[kr0ni]

Hi guys, my USB seems to have passed all the test but it only works every so often. Could this be a problem with my harddrive spinning down or going into sleep mode or something? Let me know if the log shows anyhting. Thanks.

[animeking]

Sandisk Cruzer 4GB
Works fine with MPlayerCE, but is not recognised by WiiMC…
Here is the Log file, the USB Pen passed all the tests but did not respond on Wake Up test…

Hope you will solve this problem in next releases 😀

[attachment=0:1pdjwj94]log_usb.txt[/attachment:1pdjwj94]

[calangoni]

Hi please find attached the log for my incompatible USB device.

thanks,

Nat

[aka107]

@kevinaz wrote:

Sandisk Cruzer 4GB
Works fine with MPlayerCE, but is not recognised by WiiMC…
Here is the Log file, the USB Pen passed all the tests but did not respond on Wake Up test…

Hope you will solve this problem in next releases 😀

[attachment=0:2ctol1hq]log_usb.txt[/attachment:2ctol1hq]

Uhmm, your device must work with wiimc, please check partitions, and reformat it.

@plasticpalmtree wrote:

Hi please find attached the log for my incompatible USB device.

thanks,

Nat

Your device can’t be initializated. It’s strange, I’ll make a special usb test for you, please email me
rodries at wiimc.org

[dim82]

hi, have a Western Digital Elements 1TB. formatted on a Mac OSX to FAT32. Wiimc version 1.1.4

Movies start playing ok but after 5-20 min they stop and wiimc goes to startup screen with no usb detected. Wii freezes have to press power off on wii to start up again.

Works fine on MPlayer CE.

Ran test crashed wii on bottom port. Top port worked, failed on one test.

[aka107]

@mdk wrote:

hi, have a Western Digital Elements 1TB. formatted on a Mac OSX to FAT32. Wiimc version 1.1.4

Movies start playing ok but after 5-20 min they stop and wiimc goes to startup screen with no usb detected. Wii freezes have to press power off on wii to start up again.

Works fine on MPlayer CE.

Ran test crashed wii on bottom port. Top port worked, failed on one test.

I begin to think that we have a memory leak in usbstorage.c
I’ll try to create a wiimc version with debug info, so we save it to sd for debugging pourposes.

[dim82]

My wii is softmoded to 4.1E do you think this could be a cause of the problem – that is it not the most recent version.
though i dont have any problems playing any games on it.

[aka107]

@mdk wrote:

My wii is softmoded to 4.1E do you think this could be a cause of the problem – that is it not the most recent version.
though i dont have any problems playing any games on it.

No
have you installed ios58?
are you using channel or hbc?
is hbc using ios58?

[Author]

Posts